Amplifiers, AC & DC

ITS Brushless AC Amplifier, 5000 Line, Short Protected

Part number: AMP-0039-ITS
In stock
SKU
AMP-0039-ITS
$1,200.00
Out of Stock

ITS AC Brushless Amplifier

ITS offers a AC Brushless Amplifier, XYZAB Axis suitable for any Fadal VMC that uses the 5000 line Brushless Motors and Amplifiers. Our Amplifers have current and temperature sensors built in so when there is an over current condition the current will fold over and the Amplifier will shut down rather than blow up. The axis amplifiers are one of the most important aspects of the Fadal machine and the ITS version willl last a long time.

Product Specification 

  • ITS Part Number AMP-0039-ITS
  • 30 AMP Continuous Output with 50 AMP Peak Output
  • Suitable to use with any Fadal VMC machine for all axis (XYZAB) using the smaller 5000 line aC Motors.
  • Suitable replacement for AMC AMP-0033 and Glentek AMP-0039 AC Brushless Amplifiers
  • Use with Glentek MTR-0139 and Baldor MTR-0141 AC Brushless Motors..

Complete Amplifier Support Solution 

Professional Diagnose: We offer tech support to determine whether a part needs to be replaced, or if there are any other issues or concerns.

Instruction Manual: We provide an instruction manual containing brief and simple step by step instructions of the installation procedure of the amplifier. The document also contains Preventative Maintenance tips that will help to avoid future failures and allow the Fadal parts to run long.

Warranty:

New amps: 1 year warranty

Support Service: Along with our Fadal engineering background and direct interaction with Glentek, AMC and Varedan engineers, we will provide you the best product support service not only at the time of installation, but after too.

Click Here for the Installation Guide.

More Information
Warranty

Total Engineering Support

With us you're not just getting a "Part In A Box!"
Here's four key examples of the Total Support our customers receive:

Diagnoses:

Direct help in determining if you really do need to replace the amplifier. When working with engineers that design the machine, we can help determine if there's other elements in the servo system that also need to be addressed before replacing an amplifier.

Documentation:

We provide very simple and concise, step by step instructions on how to install and get your replacement amplifier in and running. With our documentation we also include Preventative Maintenance tips to help avoid future failures.

Support:

With the combination of our engineering background and direct interaction with both Glentek and AMC engineers, you are getting the absolute best product support possible at installation and beyond.
The axis amplifiers are one of the most important aspects of the machine. Why buy something from someone without the engineering experience and the manufacturer's direct support?       

New 12 Month Warranty:

We value our relationship with each and every customer. We are driven by fairness and committed to your satisfaction.

Repair PriceNo

NEW - Motor Short Protection

Engineered for maximum performance and reliability, features such as Motor Short Protection. Our special Motor Short Protection provides additional protection when a motor or wiring becomes shorted.

With other amplifiers, a motor short typically destroys the output devices or melts circuit board traces, permanently damaging unprotected amplifiers. Our goal is to provide an amplifier that not only performers better but also lasts longer!

NEW - Faster Servo Response

The servo loop is 2x faster which provides better servo accuracy during motion and 2x the zero speed stiffness for more consistent positioning and backlash adjustments.

NEW - Better FAULT Management

We designed better current output conditions in three stages: continuous, peak, and fold back modes. Rather than just shutting down the amplifier after a 3 second peak current output, this amplifier automatically folds back to continuous motor output.

Other amplifiers never indicate when the amplifier is in the PEAK output; they simply shut down and light the Fault LED. This leaves you to wonder if a heavy cut was causing a fault or the amp/motor was faulty. Rather than just lighting an LED when the amplifier is in a FAULT mode, we added better functionality to help with diagnostics:

A) The FAULT LED lights up when the amplifier exceeds the continuous duty cycle to indicate starting the 3 sec 200% PEAK current output. After 3 seconds, the amplifier folds back to the 100% continuous output rating.

B) The LED goes OFF while in the continuous rating and the 3 second Peak output capability is restored.

C) The Fault signal goes LOW only when the amplifier is actually Faulted (unable to output power) or the motor/wires are shorted.

Total Engineering Support

With us you're not just getting a "Part In A Box!"
Here's four key examples of the Total Support our customers receive:

Diagnoses:

Direct help in determining if you really do need to replace the amplifier. When working with engineers that design the machine, we can help determine if there's other elements in the servo system that also need to be addressed before replacing an amplifier.

Documentation:

We provide very simple and concise, step by step instructions on how to install and get your replacement amplifier in and running. With our documentation we also include Preventative Maintenance tips to help avoid future failures.

Support:

With the combination of our engineering background and direct interaction with both Glentek and AMC engineers, you are getting the absolute best product support possible at installation and beyond.
The axis amplifiers are one of the most important aspects of the machine. Why buy something from someone without the engineering experience and the manufacturer's direct support?       

New 12 Month Warranty:

We value our relationship with each and every customer. We are driven by fairness and committed to your satisfaction.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account